Dry Powder Type Fire Extinguisher

Product Code: XH001-022A | BS EN3 Certified & CE Marked (CE0036)

Product Specifications at a Glance

Where a 6kg Dry Powder Extinguisher Fits

The selection of an extinguisher should reflect the fire load and working environment rather than simply the available installation space. A 6 kg dry powder unit is particularly relevant where a fire could involve combustible materials or flammable liquids and where personnel need a larger portable agent capacity.

Typical Application Areas

For each installation, the extinguisher type and quantity should be determined through the applicable fire-risk assessment and local fire-safety requirements.

A Larger Agent Charge for Higher Fire Loads

This model contains 6.0 kg of dry powder, considerably more than compact 1 kg or 2 kg portable formats.

That larger capacity is useful when the installation has:

• More combustible material in one area
• Larger equipment or vehicles
• Flammable-liquid exposure
• Greater separation between fire-risk points
• Outdoor or semi-open operating conditions
• A need for longer manual discharge

The specified 21–25 second discharge time gives the operator a substantially longer application period than smaller portable units, provided the extinguisher is used correctly and the fire remains within a safe, controllable stage.

Fire Rating: 27A 144B

The 27A 144B rating provides a clearer reference for comparing extinguisher capacity with the fire risks at an installation.

This rating should be considered together with the actual materials, fuel sources, equipment and occupancy conditions at the installation.

Dry powder extinguishers are often selected where different fire hazards may occur in the same area, particularly in vehicle and industrial environments.

Built for Industrial Handling

The cylinder is manufactured from cold rolled steel, providing the structural basis for a portable 6 kg extinguisher.

The dimensions allow the unit to be integrated into designated extinguisher stations, vehicle-service areas and industrial fire points where sufficient mounting and access space is available.

14 Bar Working Pressure and 25 Bar Test Pressure

The extinguisher is specified with a 14 Bar working pressure and a 25 Bar test pressure.

These figures are important for distributors and project purchasers because pressure specifications affect equipment selection, inspection and servicing requirements.

Why Dry Powder Is Used in Mixed-Risk Environments

Dry powder is frequently selected when one operating area contains more than one type of fire hazard.

For example, a vehicle workshop may contain:

• Fuel or lubricants
• Plastic components
• Rubber products
• Packaging materials
• Electrical equipment
• Combustible solid materials

A powder extinguisher can therefore provide a practical first-response option where the fire-risk assessment identifies a need for this extinguishing medium.

However, dry powder leaves residue after discharge. Sensitive machinery, electronics and enclosed spaces may require different extinguisher types depending on the specific risk.

Suitable for Outdoor and Semi-Open Fire Points

The 6 kg configuration is suitable for consideration in locations such as vehicle yards, fuel-related areas and large workshops where extinguishers may need to be positioned near outdoor or semi-open fire risks.

For outdoor installation, purchasers should consider:

• Direct sunlight exposure
• Rain and moisture
• Ambient temperature
• Accessibility
• Corrosion protection
• Mounting arrangement
• Inspection frequency

The stated operating environment and local installation requirements should always be checked before final deployment.

Manufactured to BS EN3

The product is manufactured according to BS EN3 requirements and carries CE0036 marking.

Quality-control measures and documentation can support distributor, commercial-building and industrial-project procurement.

Supply Options for Distributors and Projects

This model can be supplied for fire-equipment distributors, commercial facilities, industrial projects and vehicle-related applications.

Available Supply Support:

Operating Considerations

Before attempting to use the extinguisher:

1. Confirm that the extinguisher is charged and accessible.
2. Check that the safety mechanism is intact.
3. Maintain a safe escape route behind you.
4. Keep an appropriate distance from the fire.
5. Remove the safety pin or activate the designated safety mechanism.
6. Direct the discharge toward the appropriate part of the fire.
7. Sweep the agent across the burning area as required.
8. Monitor the area after apparent extinguishment because re-ignition may occur.

FAQ