Small Dry Powder Fire Extinguisher

Key Features

· Manufactured to BS EN3.

· CE Marked to CE0036.

· 5 Year Manufacturer's Warranty.

Product Information

Small Dry Powder Fire Extinguisher is used for school, office or residential fires. Small Dry Powder Fire Extinguisher is widely used for primary fires. When a fire is out of control, call the fire department immediately. Do not let the extinguisher expose to the sunlight directly.

Every extinguisher we sell comes complete with a 5 year manufacturer's warranty, provided it is serviced in accordance with the requirements of BS 5306 part 3. This guarantee does not cover defects caused by accident, misuse or neglect.

Technical Details

Product Features:

* ISO 9001 certified quality management system. 

* Multipurpose Dry Chemical Fire Extinguisher, Suitable against class A (carbonaceous), B (flammable liquid), class C (flammable

gas) and live electrical fires 

* Brass nickel-plated Head Valve with simple squeeze operation, steel cylinder with high quality, Polyester 

powder external coating and full vision pressure gauge 

* Fire Extinguishers will be delivered and serviced in accordance with BS5306. 

* Fire Extinguishers comply to BS EN3. 

* All fire extinguishers are tested no leakage. 

* Fire Extinguishers Production Date will be engraved on cylinders. 

* Fire Extinguishers will be delivered with labels including all necessary details and information and Instructions of use.  

Transport Packaging

Our services

Operations Instructions:

1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged and that the

safety pin is not bent

2. Ensure you remain a safe distance from the fire and remove the safety pin this will break the tamper seal

3. Aiming the extinguisher:

a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire

b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far

edge until all the flames have been extinguished

c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished

d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire

4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it

5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used