Adjustable Fog Nozzle

Mist pattern adjustment: The main feature is the ability to change the spray pattern from focused flow to broad mist or mist. This adjustment can usually be accomplished by rotating the nozzle or using a lever.

Straight-line stream of water: At its most concentrated location, the nozzle produces a straight-line stream of water, which is useful for targeting specific areas or hot spots in a fire. The jet is concentrated and can be projected over a longer distance.

Mist Pattern: In fog or mist position, the nozzle produces a wide, dispersed spray pattern. This is achieved by breaking up the water flow into tiny water droplets, forming fog clouds. The mist pattern effectively cools and controls the fire environment, reducing heat and smoke and providing wider coverage of the extinguishing agent.

Variable flow control: Some adjustable mist nozzles also offer flow control, allowing the user to adjust the amount of water discharged. This is useful for conserving water, increasing pressure, or fine-tuning the performance of your nozzle.

Off position: Many nozzles have an "off" position where the nozzle is completely closed, stopping the flow of water. This is useful for quickly shutting down when needed.

Products parameter

 

Code No.	Inlet	W.P.	T.P.
XH002-005A-00	Female 2.5" NST/BSP thread	100PSI	500PSI
XH002-005B-00	Female 2" NST/BSP thread	100PSI	500PSI
XH002-005F-00	Female 1.5" NST/BSP thread	100PSI	500PSI

 

Products feature

 

Shut off, straight-stream, fog.

Precision machined.

Flow is constant at 100psi regardless of adjustment.

Not for Class C (electrical) fires.

Material: Cast brass with satin finish and rubber bumper.

Thread: Must be specified by customer,BSP,NST,threaded.