Carbon Monoxide Gas Detector

Carbon Monoxide Gas Detector Information

*Adopt reliability sensor

*Intelligent microprocessor control

*Auto reset after alarming

*Auto detect sensor failure

*Alarm output: Sound, flash with LED indication

*SMT manufacture technology, ensures reliability and stability

*Easy installation

Induction gas: gas (0.1% 0.5%) , natural gas (0.1% 0.5%), liquefied petroleum gas (0.1% 0.3%).

Installation method: the wall shall be hung within 1m from the ceiling, the height shall not exceed 4m, and the gas shall not exceed 4m. It is best to install it within a radius of 1.5m.

Every fire alarm we sell comes complete with a 5year manufacturer's warranty, provided it is serviced in accordance with the requirements of BS 5306 part 3. This guarantee does not cover defects caused by accident, misuse or neglect.

Technical Details

Our Product

OPERATION INSTRUCTION 

The Gas Detector can be used independently, Or with wired networks output functions (network type). Or solenoid drive signal.

1. Independent

(1) Choose a suitable position to install the Detector according to the INSTALLATION.

(2) With a power supply, all LEDs flash once, the buzzer sends one beep, then the sensor comes into a warm-up state, the green LED flashes once a second for about 3 minutes continuously, then the detector comes into a normal working state, the green LED lights on always. 

2. Wired network

(1) Choose a suitable position to install the detector according to the INSTALLATION. Connect the detector with the controller, with the N.C. or N.O. contact optional according to the controller panel type. Please see Picture 1 for N.C. or N.O. connection.

(2) With power supply, the states are the same as independent detectors.

Our Factory

Our services