Design highlights
Ergonomic grip
The anti-slip texture depth has been optimized through grip tests, allowing for precise control even when wearing heavy gloves. The internal structure of the handle has been strengthened, capable of withstanding a drop impact from a height of 1.5 meters.
Switch systems quickly
No tools are required. Switch between DC and spray modes within 3 seconds. All control valves are made of stainless steel cores and show no wear during the switching test.
Full interface compatibility
It is standard equipped with Storz, Amercian and BS336 connectors, and Gost, Machino and French interfaces are optional.
Bulk purchase discount
Enjoy tiered pricing and more favorable annual purchase agreements
ODM cooperation
The valve position and handle Angle can be adjusted according to your operating habits
OEM service
Supports your brand identity and color customization
Core parameters
Interface size: 1.5 inches / 2 inches / 2.5 inches - Perfectly matched with existing fire protection systems
Working pressure: 100PSI (7bar) - Maximum performance at standard pressure
Net weight: 2.2 kilograms - The weight is concentrated on the grip, ensuring no fatigue even after long-term operation
Flow regulation: Wide range selection from 150L to 660L - one-click switch from fine fire extinguishing to powerful suppression
Spray distance: Minimum 32 meters - Ensure effective operation at a safe distance
Analysis of Practical Scenarios
Why has This water Gun become the common choice of fire brigades around the world.
Scene One: Fire in high-rise buildings in cities
Challenge
- It is necessary to precisely strike the fire point from a distance
- Water pressure decreases as height increases
- Fire extinguishing modes need to be switched quickly in a confined space
Our solution
The 32-meter basic range still maintains a strong impact force in high-rise fire fighting. The 2.5-inch interface, in combination with a high-flow pump truck, can still form an effective water column even when reaching a height of 30 floors at a high flow rate of 660L/ minute.
Key configuration recommendations
- Interface: 2.5 inches + Storz quick connector
- Flow rate: 450-660L/ minute range
Scene Two: Hazardous chemicals fire in a chemical industrial park
Challenge
- The amount of water used needs to be precisely controlled to avoid chemical reactions
- The demand for long-distance safe operation
- Corrosive environments cause significant damage to equipment
Our solution
The 150L/ min fine mode can be used for cooling and dilution without causing splashing. The all-aluminum alloy main body has undergone special anodizing treatment and is resistant to acid and alkali corrosion.
Key configuration recommendations
- Connector: BS336 threaded leak-proof interface
- Surface treatment: Reinforced anti-corrosion coating (optional)
Scene Three: Remote fire extinguishing in forest Mountains
Challenge
- Difficulties in long-distance water supply
- It is inconvenient to carry in complex terrain
- It requires continuous operation for a long time
Our solution
Weighing 2.2 kilograms, it is 30% lighter than similar products and can be carried around. The 32-meter range has obvious advantages when opening up fire isolation belts.
Key configuration recommendations
- Interface: 2 inches + quick snap-on connector
- Color: Custom forest camouflage coating
Scene Four: Internal fire in an industrial plant
Challenge
- The space is narrow but requires a large flow rate for suppression
- Long-term operation in high-temperature environments
- It is necessary to quickly connect fire hydrants of different specifications within the factory
Our solution
The compact design enables flexible turning in the pipe interlayer. The handle insulation layer can withstand a short-term high temperature of 150°C.
Key configuration recommendations
- Interface: Multi-specification conversion connector set
- Handle: Enhanced heat insulation version
- Flow rate: 300-450L/ minute, commonly used Settings
FAQ
Q: Is a 32-meter range sufficient for high-rise buildings?
A: At a standard pressure of 100PSI:
- Dc state: Range on flat ground is 32-35 meters, and at a 15-degree elevation Angle, the range can reach 28 meters (window on the third floor)
- Atomization state: Coverage area is approximately 40 square meters, suitable for indoor pressing
It is recommended that high-rise buildings use a 2.5-inch interface, which results in less pressure loss of the water hose.
Q: How should a chemical fire be set up?
A: Remember this mnemonic: Fog first, then straight, side wind position.
- First, dilute the harmful gases in the air with a mist water curtain (adjust the flow rate to about 300L).
- After determining the fire point, cut the direct current and strike at a fixed point
- Direct impact on the liquid surface is strictly prohibited (to prevent splashing)
Q: Can electrical equipment be used directly if it catches fire?
A: Be sure to cut off the power first! Operation after power failure:
- Select the atomization mode (turn the knob to the bottom)
- Minimum flow starting point (150L gear)
- Keep a distance of at least 5 meters and maintain a water mist Angle of 45 degrees
The gun body has undergone pressure resistance tests, but safety always comes first.
Hot Tags: high quality pistol grip fire nozzle, China, manufacturers, suppliers, factory, custom, price, for sale
