Product Core Parameter Overview

Key parameters	Specification description
Flow rate selection	115 / 230 / 360 / 475 LPM - with flushing function
Spray mode	Direct current (straight shot) / Spray (flowering)
Interface type	BS336 (other interfaces are optional)
Optional interface	Storz, Machino, NH, French, INST, Gost
Imported dimensions	1.5 inches / 2 inches / 2.5 inches
Work stress	6 bar
Maximum range	40 meters @ 6 bar
Maximum spray angle	120°
Material of the quick connection pipe	Aluminum alloy
Coupler type	Fast connector

Variable flow selection

Four flow settings, suitable for various fire situations:

115LPM: Precise control, water conservation, suitable for initial fires and small fire spots.
230LPM: Standard flow rate, the most versatile, suitable for both daily training and actual combat scenarios.
360LPM: High-flow suppression, suitable for medium-sized fires and fire situations in factories.
475LPM: Powerful output, maximum flow coverage, suitable for challenging fire scenes.
Rinse function: With one click, you can switch to low-pressure rinsing, making cleaning and maintenance more convenient.

Flexible interface matching

No more worries about interface mismatches:

Standardly equipped with BS336 interface, with strong versatility.
7 different interfaces are available, covering the mainstream standards worldwide:

Storz
Machino
NH
French
INST
Gost

Choose from three import sizes: 1.5", 2", or 2.5". Suitable for different water hoses.

Solid materials and exquisite craftsmanship

Aluminum alloy body

Lightweight design, weight reduced by 30%, making it easy to operate for long periods without getting tired.

Anodizing treatment

Corrosion-resistant, wear-resistant, longer service life.

Quick connector

Plug-and-play design, completing water hose connection within 5 seconds. Time is life.

Ergonomic grip

Anti-slip texture, comfortable to hold, and does not slip even when operating with wet hands.

Quickly switch between firing modes

One shot, two modes. The initiative on the battlefield is in your hands:

Direct current mode: Concentrated hydraulic force, long-distance direct spraying, strong penetration power, suitable for long-range attacks and deep fire suppression.
Spray mode: Wide coverage, cooling and smoke removal, protecting firefighters, providing safer close-range protection.
Quick switch design: Simply rotate the adjustment ring to switch. No tools required. Even with gloves on, it can be operated.

Combat performance

40-meter ultra-long range: Under a working pressure of 6 bar, the direct current range can reach 40 meters, allowing control of the fire scene from a safe distance.
120° wide-angle spray: The maximum spray angle provides a wide coverage area, achieving rapid cooling and smoke removal.
6 bar working pressure: Suitable for the pressure of conventional fire pumps, no special pressurization equipment is required.
Pressure test: Passed the 10bar pressure test with a high safety factor.

Wide application scenarios

Fire rescue units: urban fire fighting, forest fire fighting, industrial fire fighting.
Industrial enterprises: Petrochemical industry, power stations, warehousing and logistics.
Special locations: airports, ports, tunnels, subways.
Alternative locations: schools, hospitals, shopping malls, high-rise buildings.

Why choose us?

Freedom of choice: You can freely select the traffic, interface, and mode, and there is no need to purchase redundant functions.
Reliable quality: Each spray gun has undergone pressure testing and functional inspection.
Professional support: Offer suggestions for the matching of fire protection equipment and provide technical guidance.

Customized service support

We understand that standardized products cannot meet all needs:

OEM service: Customize the appearance, logo and packaging according to your brand requirements.
ODM Service: Adjust parameters, functions and configurations according to your specific requirements.
Bulk purchase discount: Better prices for larger quantities. We offer tiered quotations.
Technical adaptation support: Professional team assists in selection to ensure compatibility with existing equipment.

Procurement Guide

Firefighting equipment is the guarantee of life. Choose professionalism and reliability. Make sure each spray gun can perform its best at critical moments.

Clarify traffic requirements

Select the traffic level based on the protected objects and fire risk level.

Confirm interface standards

Check the types of existing device interfaces and select the matching models.

Select the import size

Determine the 1.5"/2"/2.5" interface based on the water hose specification.

Consider the usage scenarios

Indoor/outdoor, industrial/commercial, and select the appropriate configuration.

Request for customized consultation

If you need special functions or logos, please contact us to obtain the solution.

FAQ

Q1: How should these four flow rates (115/230/360/475 LPM) be selected in actual firefighting?
A: Choose based on the size and type of the fire:

115LPM: Suitable for initial electrical fires, small vehicle fires, and initial indoor fire points. The water volume is precisely controlled, minimizing water damage.
230LPM: General model, suitable for residential building fires, commercial building fires, and training purposes. It balances the fire suppression effect with water usage efficiency.
360LPM: Suitable for medium-sized fires in factories and warehouses, or for places that require rapid cooling and smoke exhaust.
475LPM: Maximum flow suppression, suitable for severe fire scenes in chemical plants, oil fires, etc. where a large amount of water is required for coverage.

Q2: When is the Flush function used?
A: There are three main scenarios:

After extinguishing the fire, clean the inside of the spray gun to prevent any impurities from remaining and blocking the nozzle.
When low-pressure water is needed at the site (such as for cleaning equipment or diluting chemicals)
Demonstrating the effect of low-pressure water flow during training sessions

Q3: How to choose the size for the imported products (1.5 inches, 2 inches, 2.5 inches)?
A: Select based on the inner diameter of your water hose:

1.5 inches: Compatible with 40mm hose, lightweight and flexible, suitable for indoor and confined spaces
2 inches: Compatible with 50mm hose, the most commonly used specification, balancing flow rate and portability
2.5 inches: Compatible with 65mm hose, suitable for high-flow requirements, ideal for vehicle-mounted and fixed fire protection systems.

Q4: How are the DC and spray modes used in conjunction in actual combat situations?
A: Typical tactical combination:

Attack phase: First, use the spray mode with a 120° wide-angle to cool down and ventilate the area, creating a passage for advance and protecting the firefighters.
Suppression stage: Switch to direct current mode. Fire a 40-meter-long direct jet at the root of the fire source to achieve concentrated water pressure suppression.
Cleaning stage: Switch back to the spray mode and cover the area extensively to prevent re-ignition.
Cover and retreat: The spray mode creates a water curtain to protect personnel during the evacuation.

Q5: What is the coverage area when the maximum spray angle is 120° in actual use?
A: At a pressure of 6 bar, when the distance is 10 meters, a 120° spray can cover an area approximately 21 meters wide; when the distance is 20 meters, the coverage width can reach about 35 meters. It is very suitable for quickly establishing fire isolation belts and cooling large groups of people.

Q6: What are the differences between OEM and ODM? We would like to print our company's logo.
A:

OEM (OEM): We will manufacture according to your design specifications, including the color of the casing, the logo of the unit, and the packaging labels, etc.
ODM (Design and Manufacturing): We will customize the product according to your specific requirements, such as adding pressure gauges, changing gear settings, providing special interfaces, etc. Detailed technical requirements must be provided.
Printing only the logo is included in the OEM service.

Q7: How do we determine how many units we need to purchase?
A: Recommended configuration ratio:

Main battle fire engine: 4 to 6 nozzles (with different flow rates) each vehicle
Command vehicle/Logistics vehicle: 2-3 spares per vehicle
Key guarded units: Calculate at 1 unit per 1,000 square meters.
Training purpose: Equip 1 set for every 5 participants.

Are there any unanswered questions?
You are welcome to contact our fire equipment consultant at any time. Provide us with your specific application scenario and we will offer you professional configuration suggestions.

Test quality in actual combat, achieve safety through professionalism - Provide the most suitable weapons for every battle.

Act immediately
Prices vary according to configurations. Please let us know your: