Key Specifications at a Glance
| Parameter | Specification |
|---|---|
| Product | CO2 Fire Extinguisher for Car |
| Product Code | XH001-054A |
| Extinguishing Agent | Carbon Dioxide (CO₂) |
| CO₂ Charge | 2.0 kg |
| Cylinder Capacity | 3.0 L |
| Shell Diameter | 105 mm |
| Height | 480 mm |
| Extinguisher Weight | 7.4 kg |
| Working Pressure | 150 bar |
| Test Pressure | 250 bar |
| Manufacturing Standard | BS EN3 |
| CE Marking | CE0036 |
| Warranty | 5 years |
| Packing Size | 120 × 120 × 510 mm / 170 × 130 × 620 mm |
Why CO₂ Is Suitable for Vehicle Fire Protection
Vehicles contain a combination of electrical circuits, batteries, wiring, control units, fuel and lubricants. The correct extinguisher therefore depends on the actual fire hazard.
CO₂ has several characteristics that make it useful for selected vehicle applications:
No Powder Residue
Unlike dry powder extinguishers, CO₂ does not discharge a layer of powder onto the protected equipment.
This can be beneficial when the fire involves:
- Electrical control equipment
- Wiring and electrical connections
- Instrumentation
- Electronic components
- Sensitive vehicle equipment
Less residue can also simplify post-fire cleaning.
Non-Conductive Extinguishing Agent
CO₂ is electrically non-conductive, making it suitable for certain energized electrical fire situations when the extinguisher is correctly rated and used according to safety requirements.
The electrical supply should be isolated whenever this can be done safely.
Suitable for Selected Class B Fire Risks
CO₂ can be used for suitable Class B fires, including certain flammable-liquid fire risks.
For vehicle applications, the actual extinguisher selection should be based on the vehicle's fuel type, electrical system, fire classification and applicable regulations.
How a CO₂ Fire Extinguisher Suppresses Fire
CO₂ works differently from dry powder.
- Oxygen Displacement
When carbon dioxide is discharged into the combustion area, it surrounds the burning material and reduces the concentration of oxygen available to support combustion. - Rapid Gas Expansion
CO₂ is stored under high pressure in liquid form. During discharge, it rapidly expands from liquid to gas. - Heat Absorption
The rapid expansion and vaporization absorb heat from the surrounding area, helping reduce the temperature of the fire zone. - Clean Discharge
After discharge, CO₂ does not leave the powder or foam residue associated with other extinguishing agents.
This is one of the key reasons CO₂ is selected for certain electrical and equipment-related fire risks.
Aluminum Alloy Cylinder for High-Pressure CO₂
The extinguisher uses an aluminum alloy cylinder, providing a high-pressure vessel configuration while helping reduce the weight associated with some steel-cylinder designs.
The specified cylinder has:
- 3.0 L nominal capacity
- 105 mm shell diameter
- 480 mm overall height
- 150 bar working pressure
- 250 bar test pressure
Because CO₂ extinguishers operate at significantly higher pressure than many dry powder extinguishers, cylinder integrity and pressure testing are critical considerations during procurement and maintenance.
2.0 kg CO₂ Charge
The extinguisher contains a 2.0 kg CO₂ charge.
The configuration provides a practical option for vehicle fire-protection applications where the extinguisher must be manually carried to the fire while maintaining sufficient extinguishing-agent capacity for the intended risk.
The actual number, size and placement of extinguishers required should be determined according to the vehicle type, fire-risk assessment and applicable regulations.
Applications for Vehicle and Mobile Equipment
The CO2 Fire Extinguisher for Car can be considered for selected applications involving electrical and Class B fire risks.
Passenger Vehicles
Suitable for selected vehicle electrical and small flammable-liquid fire risks where CO₂ is appropriate.
Commercial Vehicles
Can be considered for trucks, vans and other commercial vehicles with electrical equipment and relevant fire hazards.
Automotive Workshops
Useful where technicians work around vehicle electrical systems, control equipment and flammable liquids.
Vehicle Service Centers
Can be incorporated into fire-protection arrangements around maintenance and repair areas.
Construction & Mobile Equipment
For selected machinery and mobile equipment where electrical components create a fire risk.
Electrical Equipment Areas
The clean discharge characteristics of CO₂ make it suitable for certain electrical equipment applications beyond vehicles.
CO₂ Fire Extinguisher vs. Dry Powder Extinguisher
The two extinguishing agents serve different purposes.
| Feature | CO₂ Extinguisher | Dry Powder Extinguisher |
|---|---|---|
| Extinguishing Agent | Carbon dioxide | Dry chemical powder |
| Discharge Residue | No powder residue | Powder residue remains |
| Electrical Fire | Suitable for selected electrical risks | Suitable for selected electrical risks |
| Class B Fire | Suitable | Suitable |
| Sensitive Equipment | Advantage where clean discharge is required | Powder may require extensive cleaning |
| Cylinder Pressure | High | Lower than CO₂ configuration |
| Typical Use | Electrical equipment, selected Class B risks | Broader range of first-response fire risks |
| Metal Fire | Not suitable | Standard model not suitable |
| Indoor Use | Suitable with adequate ventilation and correct application | Suitable according to fire classification |
Important: CO₂ is not a universal replacement for dry powder or other extinguishing agents. Extinguisher selection should always correspond to the specific fire hazard.
Designed for Clean Fire Suppression
For vehicle owners and equipment operators, extinguishing the fire is only part of the consideration. The condition of the surrounding equipment after discharge can also matter.
CO₂ provides a clean extinguishing medium with no powder or foam contamination.
This can be particularly relevant around:
- Electrical control units
- Wiring systems
- Instrument panels
- Electronic equipment
- Machinery controls
- Workshop electrical installations
Where equipment is sensitive to contamination, the absence of powder residue can reduce the cleanup burden after discharge.
Operating Instructions
When a fire is detected, use the extinguisher only if the fire is at an early stage and it is safe to approach.
Confirm that the extinguisher is suitable for the fire type and that there is a safe escape route.
Keep an appropriate distance from the fire and avoid positioning yourself where smoke or flames can block your escape.
Release the safety mechanism according to the extinguisher design.
Aim the discharge horn toward the base or appropriate area of the fire.
For electrical equipment, avoid unnecessary contact with the equipment and follow the product's safe operating instructions.
Press the operating handle to discharge the CO₂.
Monitor the fire carefully after discharge. If the fire reignites or cannot be controlled, evacuate and follow the emergency response procedure.
Safety Considerations for Vehicle Use
CO₂ extinguishers require specific handling because the extinguishing agent is stored at high pressure and CO₂ can displace oxygen.
For vehicle applications:
- Keep the extinguisher securely mounted or stored in its designated position.
- Prevent movement of the cylinder during driving.
- Inspect the extinguisher regularly.
- Keep the discharge horn and operating mechanism accessible.
- Do not expose the cylinder to excessive heat.
- Do not use the extinguisher in an enclosed space without considering CO₂ accumulation.
- Evacuate the area if the fire cannot be controlled immediately.
- Follow local fire-safety and vehicle-equipment regulations.
150 Bar Working Pressure
The specified working pressure is 150 bar, while the cylinder test pressure is 250 bar.
This high-pressure specification distinguishes CO₂ extinguishers from many conventional dry powder models.
For procurement, buyers should pay particular attention to:
- Cylinder material
- Pressure rating
- Valve assembly
- Test requirements
- Certification
- Manufacturing traceability
- Inspection and servicing requirements
The supplied product specification should be checked against the requirements of the destination market before bulk purchase.
BS EN3 Manufactured & CE Marked
The product is specified as:
Manufactured to BS EN3
CE Marked to CE0036
For distributors, importers and project purchasers, certification should be verified against the exact product model and applicable market requirements before ordering.
The product documentation can also be matched with project-specific certification and labeling requirements.
5-Year Manufacturer's Warranty
The CO2 Fire Extinguisher is supplied with a 5-year manufacturer's warranty, subject to the specified servicing conditions.
The warranty does not cover defects or damage caused by:
- Accident
- Misuse
- Neglect
- Improper handling
- Failure to follow required servicing procedures
The supplied warranty conditions require servicing in accordance with the applicable requirements of BS 5306 Part 3.
OEM & Bulk Supply
For automotive-equipment distributors, fire-protection suppliers and vehicle-equipment projects, customized supply can be arranged according to order requirements.
Available service options can include:
- Customer logo
- Private-label packaging
- Product labeling
- Customized documentation
- Bulk orders
- Project-based supply
- Export packaging
For customized products, certification and labeling requirements should be confirmed according to the destination market before production.
Technical Data
| Item | Details |
|---|---|
| Model | XH001-054A |
| Extinguishing Agent | CO₂ |
| CO₂ Weight | 2.0 kg |
| Cylinder Capacity | 3.0 L |
| Shell Diameter | 105 mm |
| Height | 480 mm |
| Total Extinguisher Weight | 7.4 kg |
| Working Pressure | 150 bar |
| Test Pressure | 250 bar |
| Standard | BS EN3 |
| CE Mark | CE0036 |
| Warranty | 5 years |
| Packing Size | 120 × 120 × 510 mm / 170 × 130 × 620 mm |
Note: Overall dimensions and extinguisher weight may vary slightly depending on the supplied cylinder dimensions and cylinder mass.
FAQ
1. What type of fire is a CO₂ extinguisher suitable for?
CO₂ extinguishers are commonly selected for electrical fire risks and suitable Class B fires, subject to the specific fire classification and local requirements.
2. Why use CO₂ for a car?
Vehicles contain electrical systems and electronic components where a clean extinguishing agent can be advantageous. CO₂ does not leave powder residue after discharge.
3. Does CO₂ damage electrical equipment?
CO₂ itself does not leave the powder or foam residue associated with other extinguishing agents. However, fire, heat and thermal shock can still damage electrical equipment, so CO₂ should not be considered a guarantee that equipment will remain undamaged.
4. How much CO₂ does this model contain?
The specified CO₂ charge is 2.0 kg.
5. What is the pressure of this CO₂ extinguisher?
The specified working pressure is 150 bar, with a 250 bar test pressure.
6. Is the cylinder made from aluminum?
Yes. The supplied product information specifies an aluminum alloy CO₂ extinguisher cylinder.
7. Does a CO₂ extinguisher leave residue?
CO₂ does not leave powder or foam residue after discharge, which is one of its advantages for suitable electrical and equipment-related applications.
8. Can it be used for fuel fires?
CO₂ can be used for suitable Class B fire risks, but the specific fire situation and extinguisher rating must be considered before use.
9. Can it be used for metal fires?
No. This standard CO₂ extinguisher is not intended for combustible-metal fires.
10. Does it have CE certification?
The supplied product information states that the extinguisher is CE marked to CE0036 and manufactured to BS EN3.
11. What is the warranty period?
The manufacturer provides a 5-year warranty, subject to required servicing and the stated warranty conditions.
12. Can you provide OEM service?
Yes. Customer logos, labels, packaging and other private-label requirements can be discussed for bulk orders.
Hot Tags: co2 fire extinguisher for car, China, manufacturers, suppliers, factory, custom, price, for sale, 5kg Co2 Fire Extinguisher, Co2 Extinguisher, Co2 Fire Extinguisher, Liquid Co2 Fire Extinguisher, Portable Co2 Fire Extinguisher, Small Fire Extinguisher For Home
