Fire Detection And Fire Alarm

This product is a standalone photoelectric smoke detector. It is designed for low power consumption and high security. It can detect smoke in real-time, emit light and sound to alert, allow you to...

SD-426 series smoke alarm is a single station photoelectric smoke detector powered by 9VDC battery. It is designed to sense smoke that comes into the detector chamber.

A carbon monoxide monitoring sensor that can detect the concentration of carbon monoxide and smoke in the environment in real time. High-sensitivity sensing of temperature and smoke, accurate...

A carbon monoxide monitoring sensor that can detect the concentration of carbon monoxide and smoke in the environment in real time. High-sensitivity sensing of temperature and smoke, accurate...

The CO and smoke detector is a device detects the presence of the carbon monoxide and smoke in the area. The combination detector sends out the alarm sound and flashes to warm the enduser of the...

Photoelectric diode receives scattered light and generates photoelectric signal current Photoelectric signal generates alarm signal after being processed by identification circuit, accordingly...

The Carbon Monoxide Leakage Detector can be used independently, Or with wired networks output functions (network type). Or solenoid drive signal.

Installation method: the wall shall be hung within 1m from the ceiling, the height shall not exceed 4m, and the gas shall not exceed 4m. It is best to install it within a radius of 1.5m.

All zones accept conventional detectors and any normally-open contact device.